Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Functions of the control and display elements
PROGRAM MENU
Basic program
Service
SERVICE
Time Date
Time Date
Date 05.09.14
NOTE
PROGRAM MENU
Basic program
BASIC PROGRAM
Mode of operation
MODE OF OPERATION
Time controlled
*
NOTE
30
Inputting date and time
Press the "M" button
The following selection appears: "
vice"
Using the cursor block
Confirm your selection with "OK"
Using the cursor block
Time Date
"
"
Confirm your selection with "OK"
Move the cursor with the
in the time/date field
Select the desired figure by confirming with the cursor keys
Confirm the newly configured values for the time and date with
"OK"
If you do not wish to change the values, press no buttons for 30
seconds. The device will then revert back to the values in the op-
erating display.
Press the "M" button to leave the levels.
The clock continues to run even if the device is switched off.
Selection of functions (Example: "Select operating mode")
Press the "M" button
The following selection appears: "
vice
"
Basic program
Confirm "
Confirm the menu option "
The following selection appears: "
ume interval
" or "
Select the desired function by confirming with the cursor keys
Activate the function with "OK"
(With an active function, an " * " appears at the end of the line)
This activates the selected function.
Press the "M" button to leave the levels.
If you have activated one function, the others are automatically deac-
tivated.
Basic program
, select the menu option "
select the desired menu option for
buttons to the desired position
Basic program
" with "OK"
Mode of operation
Time controlled
Volume and Time
"
"Ser-
" or
Service
"
Ser-
" or "
" with "OK"
Vol-
", "
Publicidad
Tabla de contenido
