Maintenance; Routine Maintenance - Frigomat G5 Serie Manual De Uso

5. MAINTENANCE

5.1 ROUTINE MAINTENANCE (ADDRESSED TO THE USER)
During production, cleaning and maintenance operations, never touch the machine with
hands or tools without making sure that the machine has been disconnected from mains.
In case of troubles, make sure that they are not caused by a lack of servicing. On the
contrary, ask for the intervention of a FRIGOMAT customer service. In case it is necessary
to replace a piece, always ask a distributor or an authorized retailer for ORIGINAL spare
parts.
It is advisable to make the machine be checked by a Customer Service every 6/8 months.
6.1.1 CLEANING AND SANITIZATION
Bacteria and moulds easily proliferate due to the presence of fats in cream, that is why it is
necessary to carefully wash and clean all parts in contact with the product, such as the
cylinder, the agitator and the door.
Rustless materials and/or made of plastic for
food industry used for our machines, in
conformity with the most severe international
standards, make washing operations easier,
however they
proliferation, etc.
cleaning.
FRIGOMAT recommends cleaning the tank and
the parts in contact with the product after the
employment and in any case in compliance with
the sanitary standards in force in the country of
installation. To thoroughly clean your batch
freezer, proceed as follows:
1. Switch off the machine by pressing the
pushbutton ON-OFF and verify that the led
is grey. To set to zero the freezing timer and
verify that the led of the pushbutton "cyclic
agitation" is grey.
2. Withdraw the cover pin and remove the
cover.
3. Descrew the knob and withdraw the agitator
upwards; remove the scraper.
4. Immerge the components into a cleaning
solution and wash carefully. Use the
cleaning rod in the outfit for the cleaning of
the agitator shaft.
5. Use a sponge for removing from the cylinder
the left product.
cannot prevent
caused by insufficient
ENGLISH - 12
mould