The Meter Structure; Rotary Switch - Egatronic 51253 Manual De Instrucciones

The Meter Structure

The Figure 2-1 shows the Meter structure.
1. LCD Display
2. Functional Buttons

3. Rotary Switch

4. Input Terminals
Rotary Switch
Turn the Meter on by selecting any measurement function. The Meter presents a standard display
for that function.
The display may also be influenced by some of the choices made in Setup.
Use the blue button to select any rotary switch alternate function (labeled in blue letters).
When you turn the rotary switch from one function to another, a display for the new function
appears. Button choices made in one function do not carry over into another function.
The Table 2-1 described each rotary switch position.
Rotary
Switch Position
OFF
(COD. 51253 only)
(COD. 51254
only)
(COD. 51254 only)
(COD. 51253 only)
Table 2-1. Rotary Switch Selections
Rotary Switch Function
Turn the Meter off
DC voltage measurement
AC voltage measurement
DC millivoltage measurement
DC millivoltage measurement
Resistance measurement
Capacitance measurement
Frequency measurement
Centigrade temperature
measurement
DC current measurement
(200µA , 2000µA)
DC current measurement
(20mA , 200mA)
Figure 2-1. Meter Structure
Blue Key Function
- Frequency measurement
- Frequency signal duty cycle
measurement
- Diode test
- Continuity test
Frequency signal duty cycle
measurement
Fahrenheit temperature
measurement
Toggle between AC or DC
current
Toggle between AC or DC
current
None
None
None
None
None
39