Selecting The Range; Understanding The Display - Egatronic 51253 Manual De Instrucciones

MAX MIN
Selecting the Range
Press RANGE to select either a fixed range or the autorange feature.
Autoranging (AUTO lighted in the display) always comes on initially when you select a new
function. In autorange, the Meter selects the lowest input range possible, ensuring that the reading
appears with the highest available resolution.
If AUTO is already on, press RANGE to enter MANUAL ranging in the present range. You can
then select the next manual range each time you press RANGE.
Return to autoranging by press EXIT.
Note that there is no MANUAL ranging on REL feature.
Understanding the Display
Display features are shown in Figure 2-2 and described in Table 2-4.
Nº.
1
2
3
4
5
6
7
8
44
Chapter 2 Getting Acquainted – Using MAX MIN
The present
measurement value
minus the stored value
Figure 2-2. Display Features
Table 2-4. Display Features
Symbol
MAX
MIN
Nº
ºC, ºF (COD. 51254 only)
SET
TrueRMS
AC+DC
The stored value
Meaning
Maximum reading displayed.
Minimum reading displayed
The sequence of the reading.
Degrees Celsius (default) or Fahrenheit.
Indicates negative reading
The battery is low.
Warning: To avoid false readings,
which could lead to possible electric
shock
or personal injury, replace the battery as
soon as the battery indicator appears.
Setup feature is on.
Indicator for True RMS value
For DCV and DCA functions, reading
represents the True RMS total of AC and
DC measurements
The present
measurement value.