Egatronic 51253 Manual De Instrucciones página 41

(COD. 51253 only)
(COD. 51254 only)
Press HOLD to freeze the displayed value.
- In Store, press to toggle between clearing
Press to turn the backlight on. It is possible
(COD. 51253 only)
Setup feature:
In Setup, press to select OFF at the
selection of HIGH and LOW.
Store feature:
Store the current measurement value.
Press EXIT to exit
the Store feature.
Recall feature:
Recall the stored value. Press EXIT to exit
the Recall feature.
Setup feature:
In Setup, press to select OFF at the
selection of HIGH and LOW.
Hold feature:
Press EXIT to
release the display.
Peak Hold feature:
Press to access Peak Hold feature, the
primary display
shows PEAK HOLD. Press EXIT to exit.
- In Setup, each press to select the digit
you want to edit.
- In Recall, press to enable SEND feature
(COD. 51254 only)
all the stored
reading or start storing reading from the
current index
number. (COD. 51254 only)
Press to exit certain button functions and
the Meter will return to the factory default
setting.
to toggle between
1st and the 2nd backlight level and Exit
the feature by pressing
this button. After exiting the light feature,
it is necessary to
press and hold the button for over 1
second to turn the
backlight on again.
Press to display max, min and average
values.
Press EXIT to stop and return to current
measurement mode.
In Setup, each press to decrement an
Option.
Press the button
once after entering Setup
mode.
Press the button
once.
Press and hold the button for
over 1second.
Press the button
once after entering Setup
mode.
Press the button once.
Press and hold the button for
over 1second.
Press the button once after
entering
Setup or Recall or Store mode.
Press the button once.
Press and hold the button for
over 1 second.
Press the button once.
Press the button once after
entering SEND mode.
41