Introduction; Safety Information; Declaration Of Conformity - Kroeplin IP 67 Manual De Instrucciones

Introduction

We thank you very much for your confidence in purchasing this product.
This measuring gage is manufactured with high precision parts and carefully adjusted.
Therefore never try to disassemble or change any of the interior parts of this gage.
Do not modify the measuring arms. Do not drop or shock this gage.
Protect gage against high temperature, humidity, dust and dirt.
For a better accuracy and repeatability this gage should be used within an operating
temperature of 20 +/-10°C.
This gage is used to measure internal diameters, especially groove diameters. The gage is
supported by intelligent controlled measuring programs. It should only be used for this
purpose. Kroeplin assumes no responsibility for damages caused by inexpert handling.
In order to achieve the best use of this measuring instrument it is most
important that you first read the operating instructions and have it ready to hand.
Safety information / EC – Declaration of Conformity
Fit only the recommended battery ( Preparing to use the gage)!
Use no other types of batteries as they could damage health and cause personal
injury. The batteries supplied are not rechargeable!
Insert batteries in accordance with the polarity symbols and use the battery type
recommended in these operating instructions.
Ensure that your measuring instrument is accompanied by these instructions when
you give it to others to use.
Dispose of the battery and measuring instrument in accordance with environmental
regulations. Do not incinerate the batteries.
Do not use an electric marking tool on the caliper gage.
This measuring instrument conforms to the Low Voltage Directive 2006/95/EG and
the Directive 2004/108/EG which concerns electromagnetic compatibility.
This measuring instrument conforms to the Directive RoHS 2002/95/EG and
the amendment 2008/385/EG.
This measuring instrument conforms to the Directive PFOS 2006/122/EG.
27