Kroeplin IP 67 Manual De Instrucciones página 36

Program: TOL
Selecting the relevant digit
2x short
Increasing the digit
1x short
For confirming and saving
1x long
Afterwards you will return to the SETUP - Menu.
Quitting the SETUP – Menu
2x short
For confirming and saving.
The instrument returns to the last program used
1x long
„ERR 06" in the display could be caused by the following:
 Tolerance limit is out of the acceptable range
 The lower tolerance limit is above the upper tolerance limit
 The upper tolerance limit is below the lower tolerance limit
36
Adjusting upper tolerance limit (10,10mm)