Kroeplin IP 67 Manual De Instrucciones página 37

Activating / Deactivating the tolerance marks
Activating TOL – Program
(Example: MIN+TOL – Program)
1x long
The last selected status will appear in the display / Factory setting: 1
Switch to tolerance range "3"
The tolerance limit appears in the display down right.
2x short
Activating tolerance range "3"
1x long
The instrument returns to the last program used (ex.)
The tolerance limit appears in the display down right.
Deactivating TOL – Program
(Example: MIN – Program)
1x long
Example: 10,00 ± 0,1mm
Measuring result out of tolerance:
pointer
The LED goes of within 5s after finding the measuring value and lights up again after
finding a new measuring value.
Tolerance marks (-)
LED red
Tolerance
marks (+)
Measuring result within tolerance:
LED green
Tolerance marks
(-)
+
Pointer
Tolerance
marks (+)
37