Measuring Programs; Important; Min; Hold - Kroeplin IP 67 Manual De Instrucciones

Program: MIN / MAX / HOLD

Important:

The measuring axis
must be in central
position to the bore!
Important:
The measuring axis must
be in vertical position to
!
the measuring surface
Important:
Selected measuring
position.
Hold gage steady around
2s!
Determination of the minimum measuring value via pivoting
the gage (optimal measurement).
Measured value
too high
Determination of the maximum measuring value for measurement of
narrow grooves via lateral displacement of the gage, where the gage
cannot be pivoted vertically.
Measured value
too small
Finding and saving the measured value.
If the gage cannot be used vertical and horizontal.
Measured value
correct
Measured value
correct
Measured value
too high
Measured value
too small
33