Yamaha DSP-A2 Manual De Instrucciones página 67

Examples of operations controlled by using the
OPERATION CONTROL keys
To operate a Yamaha CD player
1. Press the "CD" input selector key.
2. Use the OPERATION CONTROL keys. (They carry out the
functions in area A of keys
OPERATION
CONTROL
Skip to
previous track
See the table below for a combination of an input selector key and key functions which the OPERATION CONTROL keys carry out.
(Also, refer to the table on page 62.)
Selected input selector key
TAPE/MD
CD
TUNER
VCR 1
DVD/LD
TV/DBS
VCR 2
V-AUX
Pressing the "PHONO" or "EXT. DEC." input selector key has no effect on the OPERATION CONTROL keys.
Notes
•
If an OPERATION CONTROL key is substituted for a key
which has no function (empty), then a command will not be
carried out.
Depending on your plan, store functions from other remote
controllers into an empty area of those keys. (Refer to page
68 for the learning method.)
•
While playing an audio/video unit, if you want to operate
another unit by using the remote controller (for example, if
you want to rewind a videotape while listening to a CD), you
should open the cover of the remote controller and use the
A/B/C switch and the corresponding keys.
(If you press an input selector key with the cover closed to
change the functions of the OPERATION CONTROL keys to
the functions for controlling a VCR, the input of currently
playing CD source is canceled.)
2
.)
Play
Skip to next
track
Pause or Stop
Key functions which the OPERATION CONTROL keys carry out
Functions in area A of keys
Functions in area A of keys
Functions in area A of keys
Functions in area B of keys
Functions in area B of keys
Functions in area B of keys
Functions in area C of keys
Functions in area C of keys
Functions in area C of keys
To operate your VCR
1. Press the "VCR" input selector key.
2. Use the OPERATION CONTROL keys. (They carry out the
functions in area B of keys
with no function. You must store the functions related to
controlling the VCR in area B of keys
Rewind
1
(except REC/PAUSE, A/B, DIR A and B)
2
(except STOP, DISC,
3
1
(except REC/PAUSE, A/B, DIR A and B)
2
(except STOP, DISC,
3
1
(except REC/PAUSE, A/B, DIR A and B)
2
(except STOP, DISC,
3
About the lighting of keys
When an input selector key is pressed, the pressed key and
only the available OPERATION CONTROL keys (which
substitute for the keys stored with the preset functions or
learned functions) light up for about 3 seconds. So you will
know what keys are available at a glance.
TUNER
Conversely, when an OPERATION CONTROL key is pressed,
all of the available OPERATION CONTROL keys and the
currently selected input selector key light up.
REMOTE CONTROLLER
1
. This area is originally preset
1
beforehand.)
Play
OPERATION
CONTROL
Fast forward
Pause or Stop
and )
and )
and )
OPERATION
CONTROL
65