When The Security Kit Is Installed - Sharp AR-FR24U Manual De Instrucciones

ENGLISH

WHEN THE SECURITY KIT IS INSTALLED

0666211221
PRINT JO
When the security kit is installed, data remaining in the unit is automatically erased after
each copy, print, scan, and fax*
When data clearing begins, the following message appears for 6*
DATA IS BEING CLEARED.
If the job is large and more than 6*
progress bar appears:
DATA IS BEING CLEARED.
*1 Excluding direct fax transmission and manual fax transmission. The fax data is not
held in Flash memory and thus there is no need to clear it.
*2 The duration of the message display can be changed with the key operator program,
"MESSAGE TIME SETTING". (See page 11 of the key operator's guide.)
NOTES
● When printing a normal print job in printer mode, the image data is automatically
cleared from memory after printing is completed. However, when the job retention
function is used (see the online manual for network printer), the image data is retained
in memory. The retained image data can be cleared by selecting the hold data and
then touching the [DELETE] key.
●
If the machine power is turned off while image data is being cleared from memory or
before a job is finished, the data may not be completely cleared. If you wish to prevent
this from happening, use "CLEAR ALL MEMORY" in the key operator programs (page
4 of this manual) to completely clear all data before turning off the power.
When the data security kit is installed, the following icon
appears on the touch panel. In the job status screen, touch
the icon ( ) to view information on the data security kit
version.
1
job.
●
The message and progress bar are not
displayed while the data of a fax job is being
erased.
2
seconds is required to clear the data, the following
●
While data clearing takes place, the
percentage of data cleared is displayed.
50.00%
2
2
seconds.