Solter aeroprocess 4000 CC Manual De Instrucciones página 34

P.15 -
P.16 -
P.17 4
P.18 50
P.19 2
P.20 70
P.21 3
P.22 50
P.23 10
P.24 420
P.25 -
P.26 -
P.27 -
P.28 7
P.29 65
P.30 -
P.31 -
P.32 -
P.33 -
P.34 -
P.35 -
P.36 -
P.37 -
P.38 -
P.39 -
P.40 -
P.41 -
P.42 -
-
P.43
-
P.44
-
P.45
P.46 -
P.47 -
P.48 -
P.49 -
P.50 -
P.51 -
SOLTER
SOLDADURA S.L.
Not available in this model.
Not available in this model.
Torch length in meters. Allows you to compensate the voltage reading.
Cable's section in the torch, in mm
Length of connection between power unit and winder, in meters.
Length of connection between power unit and winder, in meters.
Length of earth cable, in meters. Allows you to compensate the voltage reading.
Section of earth cable, in mm
Minimum amperage setting in remote MMA mode. See P.03
Maximum amperage setting in remote MMA mode. See P.03
Not available in this model.
Not available in this model.
Not available in this model.
Arc-force sensitivity for coated electrodes.
It allows the adjustment of sensitivity to activate the arc-force mode. A high value de-
lays the activation of this feature. Lower values improve the transfer of material for
aluminium or stainless steel-coated electrodes.
Amperage preheating for TIG ignition. A high value facilitates ignition, but can cause
the tungsten to stick to the work piece.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
2 . Allows you to compensate the voltage reading.
. Allows you to compensate the voltage reading.
2
AEROPROCESS 13