Setup; Unpacking; Inspection; Location - Invacare XPO2 XPO100 Manual Del Usuario

4 Setup

4.1 Unpacking

1. Check for any obvious damage to the carton or its contents. If
damage is evident, notify the carrier, or your local dealer.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton. The
Invacare XPO concentrator's packaging contains the following
2
items (as shown below). If any parts are missing, please contact
your equipment provider.
•
XPO with carrying bag
2
•
User manual
•
AC power adapter
•
DC power adapter
•
Supplemental battery (EU and AZ model XPO100B only)
•
Accessory bag (EU and AZ model XPO100B only)
Retain all containers and packing materials for storage or
return shipment.

4.2 Inspection

Inspect/examine exterior of the oxygen concentrator and accessories
for damage. Inspect all components.
1148112-F~12

4.3 Location

WARNING!
Risk of Injury or Damage
To avoid injury or damage from airborne pollutants
and/or fumes and for optimal performance:
– Locate and position the concentrator in a well
ventilated space so that the air intake and the air
exhausts are not obstructed.
– NEVER block the air openings of the concentrator
or place it on a soft surface, such as a bed or couch,
where the air opening may be blocked.
– Keep the openings free from lint, hair and similar
foreign items.
– Keep concentrator at least 12 inches (30,5 cm) away
from walls, draperies and furniture.
– Avoid use in presence of pollutants, smoke or fumes,
flammable anesthetics, cleaning agents or chemical
vapors.
– Place concentrator in a well ventilated area to avoid
airborne pollutants and/or fumes.
– DO NOT use in a closet.
Setup
21