Invacare XPO2 XPO100 Manual Del Usuario página 36

Ocultar thumbs Ver también para XPO2 XPO100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Invacare® XPO₂™
ALARM/WARNING:
SYMPTOM
BATTERY TOO HOT/COLD ALARM:
Continuous audible beep and red alarm
indicator is illuminated.
AND
Flow indicators 1 & 4 are illuminated.
STUCK BUTTON ALARM:
Continuous audible beep and red alarm
indicator is illuminated.
AND
Flow indicators 1 & 5 are illuminated.
36
PROBABLE CAUSE
Internal Battery has become too hot, or too
cold, during operation.
A stuck button is being detected upon power
up.
SOLUTION
1.
Unplug chargers if connected.
2.
Allow concentrator to cool down to less
than 95ºF (35°C), or warm up to 50ºF
(10°C), before resuming charging, or
turning Off the concentrator and turning
the concentrator On again.
3.
If the alarm continues, change to another
source of oxygen and contact your
equipment provider.
1.
Turn Off the concentrator.
2.
With the concentrator turned Off, press
each control button looking for a stuck
button.
3.
Turn On the concentrator while ensuring
that you are not continuing to hold the
Power On/Off button once the lights
begin to illuminate.
4.
If the alarm continues, change to another
source of oxygen and contact your
equipment provider.
1148112-F~12

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xpo2 xpo100b

Tabla de contenido