Stryker Power-PRO IT Manual De Uso Y Mantenimiento página 44

UNLOADING THE COT FROM A VEHICLE WITH TWO OPERATORS - POWERED METHOD (CONTINUED)
English
4. Operator 2 − Pull the safety bar release lever forward
to disengage the safety bar from the safety hook in the
patient compartment as shown in Figure 22.
5. Remove the load wheels from the patient compartment
of the vehicle.
CAUTION
• When unloading the cot from the patient compartment,
ensure that the caster wheels are safely set on the
ground or damage to the product may occur.
• Do not "jog" the cot past the established cot load height
of the product when the safety bar engages the vehicle
safety hook or damage may occur to the product.
Return To Table of Contents
1-38
Operation Guide
Figure 22: Disengaging the Safety Bar
6516-109-005 REV B www.stryker.com