Installing The Head End Storage Flat - Stryker Power-PRO IT Manual De Uso Y Mantenimiento

INSTALLING THE HEAD END STORAGE FLAT

WARNING
When the optional head end storage flat is being used, ensure that it does not interfere with the operation of the
retractable head section, safety bar and safety hook. Injury to the patient or operator could result.
B
Cross Bar
To install the optional head end storage flat (see Figure 46):
1. Install the Velcro ® straps (A) near the pneumatic cylinder and around the cross bar of the retractable head section.
2. Buckle the restraint straps (B) around the outer rails of the retractable head section.
CAUTION
The weight of the equipment in the head end storage flat (if equipped) must not exceed 40 lb (18 kg).
www.stryker.com
Operation Guide
A
A
Figure 46: Head End Storage Flat
6516-109-005 REV B
B
V-Tube
Return To Table of Contents
English
1-59