58
ENGINE OPERATION
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
1
1. Control lever
2. Main switch key
2. Turn the main switch key to the OFF
7
position.
1. ON
2. START
3. OFF
ENOW00869-0
After stopping the engine:
Close the air vent screw on the fuel tank
cap.
Disconnect the fuel connector of the
engine and the fuel tank.
Disconnect the battery cord, after each
use.
N
2
ENOF00881-1
3
1
2
ENOF00871-1
WARNING
ENOM00975-0
Top mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
N
1
1. Control lever
2. Turn the main switch key to the OFF
position.
5
2. Main switch key
3. ON
4. START
5. OFF
ENOW00869-0
WARNING
After stopping the engine:
Close the air vent screw on the fuel tank
cap.
Disconnect the fuel connector of the
engine and the fuel tank.
Disconnect the battery cord, after each
use.
F
N
R
ENOF00939-0
3
4
2
ENOF00938-A