GE Monogram ZET1P Manual Del Propietário página 16

Using the Probe fbr Roasting
W_dl Oven
Ho_ to set
the oven for
roasting
when using
the probe
Doub/eoven disp/ayshown.
@ @ ®
PROBE TIMEn CLOCK
Pushto select
l
COOK OELe.V
rmME START
Mini-Kn0b
Turnto select
Push t0 enter
OFF OFF
O
CLEAN PROOF
CONVECTION CONV BARE
BROIL • MULTi
CONVECTION
ROAST
Oven Mode Knob
500 " ® " 400
450
Temperature k nob
1
2
Insert the probe into the meat.
Plug tile probe into tile outlet in the oven.
Make sure it is pushed all the way in.
Close the oven door.
3 Push tile PROBE button.
NOTE': On double wall oven models, the oven
cont_vl will automclticcdly set the oven their hcls the
probe pl_gged into it.
Turn the Mini-Eaob to select and push it
to enter tile desired internal food or meat
temperature. Tile minimum and maximum
internal temperatures fbr the food that you
can enter are 100°F to 200°E
"PROBE" will flash in the display if the probe is
inserted into the outlet clnd you helve not entered cl
p_vbe te,nperatu_v.
Turn the Oven Mode knob to BAKE. For
convection roasting with tile probe, see tile
How to set the oven jbr convection roasting" with,
the probe section.
Using the Temperature knob, set the desired
oven temperature, in 25°F increments, from
200°F to 550°E
Tile oven and tile oven interior lights will
ttlIn
on immediately and stay on until tile
oven is turned off.
The convection tan will mrn on (after a
short delay), the PROBE light will mrn on
and 100°F will appear in the display. (Tile
temperature display will start to change once
tile internal temperature of tile meat reaches
m0°E)
CAUTION: To prevent possible burns, do not unplug
the probe from the oven outlet until the oven has
cooled. Do not store the probe in the oven.
When tile internal temperature of tile
meat reaches the number you have set,
the probe and the oven mrn off} END will
show in tile display and tile oven control will
beep. (PROBE will remain lit along with tile
probe temperature.) To stop the reminder
beep, mrn tile Oven Mode knob and tile
Temperature knob to OFF or push tile
Mini-Ealob. Use hot pads to remove tile
probe fiom tile food. Do not use tongs
to pull on it--they might damage it.
"PROBE" will flash in the disHa,y until the probe
is removed /?om the oven receptclcle.
To change tile set internal fbod or meat
(probe) temperature during tile Roast cycle,
push tile PROBE button, turn the Mini-Ealob
to select the new temperature and push to
enter it.
" You can use tile timer even though you
cannot use timed oven operations.
16