Start-Up Procedure From The Control Panel; Installing New Features (Optional) - effegibi NUVOLA TOUCH Manual De Uso

4.

START-UP PROCEDURE FROM THE CONTROL PANEL

At the first start of the steam generator the following START-UP procedure must be followed. Remove the
yellow sticker and connect the steam generator to the electricity and water supplies. Press the sequence of
keys as indicated in the picture below:
Wait until the SLIDERS complete their action and hold down "HAMMAM key" for 3 seconds.
The HAMMAM key flashes, During this phase, which lasts from a minimum of 15 seconds to several
minutes, the generator will install and recognize all peripherals.
4.1

INSTALLING NEW FEATURES (OPTIONAL)

If any OPTIONAL EXTRAS (RGB colour therapy ceiling fitting, POWER STEAM, external control panel) have
been added to the steam generator, the START-UP procedure must be followed.
Manuale d'uso GV Nuvola TOUCH
UK
24 di 88