Tabla de contenido
Publicidad
EN
G
E
7) ELECTRICAL INSTALLATION OF THE HTL
§7.1 - Mounting of the control box, the (+) battery cable
and (-) earth cable
Follow the instructions of document FIT-ELEC-
G E N E R A L - 2 0 0 8 - 0 2 A
www.dhollandia.com for latest version] to
mount the control box, the 35mm² (+) battery
cable, and the 35mm² (-) earth cable of the
HTL.
Also follow the FITTING AND BODY BUILDING
INSTRUCTIONS of the vehicle manufacturer.
Disregard could potentially cause serious dam-
age to the electric systems of the HTL, and / or
the electric and electronic circuits of the vehi-
cle.
G
E
§7.2 - Optional mounting brackets for the external control
box
In standard execution, the control box is supplied loose
with the HTL, and is mounted to the body of the vehicle.
For orders including option S411.S, DHOLLANDIA sup-
plies a quick-fit bracket to mount the control box to the
sliding tubes, adapted to the type of sliding tube [See Fig.
7.1 to 7.3].
7.1
Alu sliding tubes, side-mounted
7.2
Alu sliding tubes, under-mounted
7.3
Steel sliding tubes, under-mounted
Plan the position of the control box prior to mounting the
sliding tubes, as it might influence on the fitting procedure.
DHOLLANDIA
7.1
[ S e e
7.3
7.2
67
Publicidad
Tabla de contenido
