46
ENGINE OPERATION
ENOW00056-A
When tilting up outboard motor with fuel
joint for over a few minutes, be sure to dis-
connect fuel hose, or fuel may leak, poten-
tially catching fire.
ENOW00057-0
Do not tilt up outboard motor while engine
operates, or no cooling water may be fed,
leading to engine seizure due to overheating.
ENON00921-0
Note
Before tilting the outboard motor up, after
stopping the motor leave it in the running
position for about a minute to allow water
to drain from inside the engine.
7
ENOM00062-0
Manual Tilt type
Tilt up
Push the reverse lock lever down until it
stops. (This is the tilt up position.) Now,
tilt the outboard motor all the way up
until it is locked in place.
3
1. Reverse lock lever
2. Tilt down position
3. Tilt up position
WARNING
CAUTION
1
2
ENOF00059-0
ENOM00063-1
Tilt down
Pull the reverse lock lever upward until it
stops. (This is the tilt down position.) Lift
up the outboard motor slightly, and then
lower it.
1
2
3
1. Reverse lock lever
2. Tilt down position
3. Tilt up position
ENOM00069-A
Power Tilt type
Tilt up
1. Operate the Power Tilt switch and tilt
the outboard motor up.
2. Lock the tilt with the Tilt stopper after
the outboard motor has been tilted
up
Tilt down
1. Release the tilt stopper from the set-
up position while slightly tilting up
outboard motor.
ENOF01216-1
ENOF00059-0