Using The Amplification Function - ClearSounds CSC50 Guía De Instalación Y Manual De Usuario

3. Dial the number and wait for someone to answer.
a. If you are using the 3.5mm Audio/Neckloop Jack, and want to speak into the
handset, lift the handset and speak into it. Adjust your volume. On completion
of the call, carefully replace the handset in the cradle.
b. If you are using the 3.5mm Audio/Neckloop Jack, and want to speak into the
speakerphone, press the "SPKR" speakerphone button for hands-free opera-
tion, and talk into the speakerphone (the conversation will be heard through
both your audio equipment and over the speakerphone). Adjust your volume.
On completion of the call, press the "SPKR" speakerphone button.
c. If you are using the 2.5mm Headset Jack for hands-free communication, leave
the handset in the cradle, and talk into the headset microphone. Adjust your
volume. On completion of the call press the
Receiving/Answering A Call:
1. Plug your accessory into the Audio/Neckloop Jack or Headset Jack.
2. If using the audio jack, press the "SPKR" or lift handset.
3. If using the headset jack, press the
to answer the call.
4. Depending on whether you are using the 3.5mm Audio/Neckloop Jack or 2.5mm
Telephone Headset Jack follow the directions above (A, B or C)
Using the Amplification Function
The CSC50 Phone has an "AMPLI" button that controls the loudness and tone of the
handset. Without pressing the "AMPLI" button, you are able to amplify the handset up to
30 dB of amplification. Once the "AMPLI" button is pressed, an extra level of amplification
is added providing 30 to 50 dB of gain and tone control.
Voice Amplification and Tone
Your CSC50 Phone is equipped with a specialized amplification function designed to fit
your needs. You can adjust the volume and tone (sound frequency range) of the incoming
voice by simply adjusting Volume and Tone Controls. To use the specialized amplification
boost and tone control features, follow these directions.
1. Once you have dialed the phone or answered a call, press the "AMPLI" (amplify)
button
(See figure #24)
fier is ON, you will see the red light on the left side of the "AMPLI" button light up.
i.e. "AMPLI"
Figure #23 – Audio / Headset Jack Button
. This turns the incoming voice amplifier ON. When the ampli-
headset button.
(headset) button while the phone is ringing
19