Publicidad
Idiomas disponibles
Idiomas disponibles
Taking a call/Ending a call
Incoming calls are signalled by the system's standard ring tone. However, depending on
the type of phone used and its status (for example: vibracall mode), the ring tone heard
might not be the standard one but the default setting for that mobile phone.
Take the call by briefl y pressing the button.
At the end of the conversation, end the call by briefl y pressing the button.
Rejecting a call
You can reject an incoming call by briefl y pressing the button twice.
Last number redial
Redial by briefl y pressing the button twice.
Privacy mode
During a call, press and hold the button down to disable the hands free set and the call
will be transferred to the telephone. You can return to hands free mode by holding the
button down again.
Table of available commands using the button/led
Answer call
Reject call
(with ring on hands free)
End call
Redial last number
Voice call
Call waiting
(with call in progress)
Transfer
(privacy/hands free and vice versa)
Adjusting the sound level
While you are taking a phone call, you can adjust the sound level, if
necessary, by simply pressing the + and – keys at the side of the led/
switch.
The system will increase or decrease the volume each time you press
one of these.
You can also adjust the volume using the telephone's controls.
Please refer to the telephone's operating manual for further details.
Calling numbers without a voice tag
If you need to call a number that has no voice tag stored, you can use your mobile pho-
ne's keypad to place the call. The call will then be automatically transferred to the hands
free set so you can continue your conversation in total safety.
Press briefl y (< 1 s.)
Press briefl y twice
(two presses in max time of 2 s.)
Press briefl y (< 1 s.)
Press briefl y twice (two presses in max
time of 2 s.)
Press and hold (> 3 s.)
Press briefl y twice (two presses in max
time of 2 s.)
Press and hold (> 3 s.)
9
Publicidad
