Assembly Of The Pump Kit - Medela Symphony Instrucciones De Uso

9. Assembly of Pump Kit
T Tip
Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
Parts Needed:
• Tubing
• Symphony ® pump
• Breastshields
• Breastmilk bottles
• Lids
• Connectors
• Valves
• Membranes
• Membrane cap
• Protective membrane
Note
• Use Authentic Medela Spare Parts
only. See page 6 for details.
• Check pump kit components for
wear or damage before use and
replace if necessary.
• All components must be completely
dry before use for proper
performance and to prevent damage
to the pump.
20
1
Caution
Wash hands thoroughly with soap and water
before touching breastpump, kit and breasts and
avoid touching the inside of containers or lids.
4
Push the valve head and
membrane onto the connector.
¥ Position valve head laterally.
7
Place the protective membrane
onto a fl at surface and carefully
push the membrane cap down
until it engages.