Writing Songs To A Usb Flash Drive (Export); Importing Songs In The Usb Flash Drive To The Js-10 (Import); Changing The Patch When The Song Is Switched (Patch Sync) - Boss eBand JS-10 Manual De Instrucciones

Convenient Functions
Writing Songs to a USB Flash Drive
(Export)
You can export eBand songs saved on an SD card to a USB flash
drive .
1.
Connect the USB flash drive to the USB MEMORY port .
2.
Select a song in the JS-10 .
3.
Follow this sequence of steps: [MENU] button  "SONG"
 [ENTER] button  "EXPORT"  [ENTER] button .
The SONG EXPORT screen appears .
MEMO
The "EXPORT" menu is not displayed if the USB flash drive has
not been inserted .
4.
Press the [ENTER] button to export the songs .
The song will be written to the USB flash drive .
Importing Songs in the USB Flash
Drive to the JS-10 (Import)
You can import songs in the USB flash drive to the JS-10 .
1.
Connect the USB flash drive to the USB MEMORY port .
2.
Select a song in the USB flash drive .
3.
Follow this sequence of steps: [MENU] button  "SONG"
 [ENTER] button  "IMPORT"  [ENTER] button .
The SONG IMPORT screen appears .
MEMO
The "IMPORT" menu is not displayed if a song on the USB flash
drive has not been selected .
4.
Press the [ENTER] button .
The song will be saved as USER on the SD card .
MEMO
For details about the memory configuration in the JS-10 or the
data that is saved, refer to "Memory Configuration in the JS-10"
(p . 38) .
22
Changing the Patch When the Song
is Switched (PATCH SYNC)
If a patch number is set for a song in advance, you can call up that
patch number automatically when the song is switched .
MEMO
The PATCH SYNC function cannot be used for songs in the USB
flash drive .
1.
Follow this sequence of steps: [MENU] button  "PATCH
SYNC"  [ENTER] button .
The PATCH SYNC screen appears .
2.
Apply the settings for PATCH SYNC .
Set the patch number at IN1 for INPUT 1's effect, and IN2 for INPUT
2's effect .
IN1/IN2 Explanation
OFF The patch will not change when you switch songs .
Calls up the specified preset patch number when the
P***
song is switched .
Calls up the specified user patch number when the
U***
song is switched .
Disabling the PATCH SYNC function
You can switch the JS-10 PATCH SYNC function ON and OFF . Set it
to OFF if you want the patch number set in PATCH SYNC to always
be ignored .
1.
Press the [ENTER] button on the PATCH SYNC screen .
Press the [ENTER] button to alternately switch it ON and OFF .
SYNC SW Explanation
The PATCH SYNC function is disabled .
OFF
The patch number set in PATCH SYNC will be ignored,
and the current effect setting will be used .
The PATCH SYNC function is enabled .
ON
When you switch a song, the patch changes to the
number set in PATCH SYNC .
Setting Current Patch in PATCH SYNC
You can set the patch number of the current effect in PATCH SYNC .
1.
Align the cursor with either the IN1 patch number or the
IN2 patch number on the PATCH SYNC screen .
Align the cursor with the effect you want to add to PATCH SYNC .
2.
Press the [SPEED] button .
The current patch number is set in PATCH SYNC . The next time
you switch to this song, the patch number set will be called up
automatically .