Using Footswitches And Expression Pedals; Allocating Functions To Footswitches - Boss eBand JS-10 Manual De Instrucciones

Convenient Functions

Using Footswitches and Expression Pedals

You can connect two BOSS FS-5U (sold separately), a BOSS FS-6 (sold separately), or a Roland EV-5, etc . (sold separately) to perform a variety of
operations with your foot .
When you connect an
EV-5, etc .
MEMO
• Never connect or disconnect a footswitch or expression pedal while this unit's power is on .
• Use only the specified expression pedal (Roland EV-5; sold separately) . By connecting any other expression pedal, you risk causing malfunction
and/or damage to the unit .

Allocating Functions to Footswitches

1.
Follow this sequence of steps: [MENU] button  "SYSTEM"
 [ENTER] button  "PEDAL"  [ENTER] button .
Set a function to CTL 1 or CTL 2 .
CTL 1 / CTL 2 Explanation
PLAY/STOP
Operate the player (Play/Stop) .
REC/STOP Operate the recorder (Rec/Stop) .
Switch the effect patch number for INPUT 1 (GUITAR/
IN1 PATCH +1
MIC) jack (+1) .
Switch the effect patch number for INPUT 1 (GUITAR/
IN1 PATCH -1
MIC) jack (-1) .
Switch the effect patch number for INPUT 2 (GUITAR/
IN2 PATCH +1
MIC) jack (+1) .
Switch the effect patch number for INPUT 2 (GUITAR/
IN2 PATCH -1
MIC) jack (-1) .
30
One of these can
be connected .
EXP PEDAL/CTL 1,2 jack
1/4-inch phone type 
1/4-inch phone type
When you connect one FS-5U
OR
CTL1
POLARITY switch
Stereo 1/4-inch phone type  Stereo 1/4-inch phone type
Tip of the stereo 1/4-inch phone type
TIP
Stereo 1/4-inch phone type  1/4-inch phone type x 2
When you connect two FS-5Us
OR
CTL2 CTL1
MODE and POLARITY switches
Functions you can control with expression
pedals
The function of the expression pedal (sold separately) changes
depending on whether the WAH effect for INPUT 1 is ON or OFF .
MEMO
Controls from the expression pedal work on the sound input to
the INPUT 1 jack .
WAH effect (p . 35 )
ON
OFF
RING
When you connect an FS-6
OR
CTL2 CTL1
Expression pedal's function
Operates as wah pedal for INPUT 1 .
Operates as volume pedal for INPUT 1 .