Height Adjustment; Elevating Legrest (Optional) - Zippie IRIS Manual De Usuario

Set-up and Adjustment

HEIGHT ADJUSTMENT

a. Loosen and remove the retaining bolt (G) in the footrest
mounting bracket.
b. Slide the lower tube upward or downward to the desired
position until predrilled holes on hanger tubes are aligned.
c. Reinsert bolt and tighten.
4. Footrest Angle Adjustment
a. Loosen the retaining bolt (H) in the adjustment locking joint.
b. Position footrest forward or rearward in desired angle.
c. Retighten the bolt.
5. Footplate Angle Adjustment
a. Loosen the retaining bolt (I) in the footplate locking joint.
b. Position footplate upward or downward in desired angle.
c. Retighten the bolt.
ARTICULATING LEGREST (OPTIONAL)
1. Installation or Removal
To install or remove Articulating Legrest (ALR) see
instructions for Swing-away Footrest installation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will
automatically lock in place.
b. To lower legrest, while seated in chair, press release lever
(A) down and lower legrest to desired position. Legrest will
automatically lock in place.
3. Height Adjustment of the Calf Pad
a. Rotate the tube clamp (B) towards the outside.
b. Slide it up or down.
c. Rotate it back in the desired indented position.
4. Height Adjustment with Extension Tube
a. Remove the bolt (C) in the hanger frame tube.
b. Reposition footrest height.
c. Align the tube clamp with the selected bolt.
d. Re-tighten the bolt (C).

ELEVATING LEGREST (OPTIONAL)

1. Installation or Removal
To install or remove Elevating Legrest (ELR) see instructions
for Swing-away Footrest installation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will
automatically lock in place.
b. To lower legrest, while seated in chair, press release lever
(D) down and lower legrest to desired position. Legrest will
automatically lock in place.
3. Height Adjustment of the Calf Pad.
a. Loosen the retaining nut (E) located at the back of the calf
pad bracket assembly.
b. Slide the calf pad bracket assembly up or down.
c. Tighten it in the desired position.
4. Height Adjustment with Extension Tube
a. Loosen both bolts (F) in the hanger frame tube.
b. Reposition footrest height.
c. Re-tighten all bolts (F).
ZIPPIE IRIS 17