REXROTH Gabel 400 SET Manual De Instrucciones Mantenimiento página 46

18/28 Assembly
The sliding blocks and
screws for mounting the
attachment plate are pre-
assembled in the slider
slots.
Note:
¹) This sliding block is used
as a safety at the bottom
edge and is bonded with
Loctite 601.
Do not loosen or
remove!

Mount the attachment
plate.
²) The sliding block used
for fastening is placed
on the safety sliding
block. This ensures a
120 mm fl oor clearance
below the rollers of
the fl oor roller once it
reaches the safety zone.

Mount the left and
right fork prongs to the
attachment plate. Align
the fork prongs with the
center axis of the case
lifter.
³) Identifi cation of the
safety zone with a red
cover profi le.
⁴) Warning label (yellow/
black), see page 20.
Bosch Rexroth AG, MPS, 3 842 358 712/2014-01
2
3
)
Fig. 8: Mounting the attachment plate and fork for fl oor roller applications with 135 mm fl oor
clearance
1
1
)
ISO 4762 M8x14-10.9
3
0 2
)
(4x)
SW6
M =22 Nm
D
4
)
3 842 528 735
SW6
1
SW6
M =10 Nm
D
358 709-29