Commissioning - REXROTH Gabel 400 SET Manual De Instrucciones Mantenimiento

20/28

Commissioning

Bosch Rexroth AG, MPS, 3 842 358 712/2014-01
Note:
The warning labels (yellow/black) are not conductive!

Using alcohol, clean the area where the labels are to be placed.

Attach the warning labels (on outside for bins, outside/inside for fl oor rollers).
8 Commissioning
Moving device parts!
Danger of crushing body parts between the machine, peripherals, or fl oor.

Make sure that no persons or objects are under the forks or in the identifi ed
danger area during operation.

The free height of the forks in the safety stop position must be ≥ 120 mm and
the distance between the workstation and moved parts on the case lifter must
be ≥ 120 mm.

Make sure that the case lifter, load, and all load movements are visible to
operating personnel at all times.
1. Make sure that
– the danger areas (see page 12) around the case lifter are properly identifi ed.
– the case lifter and load are visible to operating personnel during operation.
2. Adjust the mounted forks to the width of the bin or fl oor rollers (see page 21).
Safety instructions:

Make sure the lifting accessories are securely and correctly positioned each time
the device is commissioned (see page 24).
WARNING