JA Y 3 B AC K
1. Spine Align Positioning Component installation
a. Have the user remove pressure from the J3 Back by leaning or sliding partially forward
if possible.
b. Release Velcro strip on the top cover flap (A) and lift the cover forward to reveal the
inside of the J3 Back.
c. Place the positioning component(s) (B) on the Velcro inside of the shell and reattach
the top cover flap. Pull down making certain that the top seam is aligned with the top
of the shell. If seam does not line up, the bottom of the cover may need to be loos-
ened .
d. Have the user test the current Spine Align setup for comfort and support and repeat
steps a-c until adjustment is complete.
e. Multiple configurations and combinations of Spine Align components can be used. If
additional Spine Align shapes or sizes are required, please contact your dealer or
Sunrise Medical at 800-333-4000.
NOTE–
If you require further information on the J3 Spine Align system, please review our animation
at www.sunrisemedical.com.
24 MONTH LIMITED WARRANTY
1.
Each Jay J3 Back is carefully inspected and tested to provide peak performance.
Every Jay J3 Back is guaranteed to be free from defects in materials and workmanship for a
period of 24 months from the date of purchase, provided normal use. Should a defect in
materials or workmanship occur within 24 months from the original date of purchase,
Sunrise Medical will, at its option, repair or replace it without charge. This warranty does not
apply to punctures, tears or burns, nor to the back's removable cover.
2.
Claims and repairs should be processed through the nearest authorized supplier.
Except for express warranties made herein, all other warranties, including implied warranties
of merchantability and warranties of fitness for a particular purpose are excluded. There are
not warranties which extend beyond the description on the face hereof. Remedies for
breach of express warranties herein are limited to repair or replacement of the goods. In no
event shall damages for breach of any warranty include any consequential damages or
exceed the cost of non-conforming goods sold.
25
26
11
Top seam
Top
cover
flap
Spine Align
components
VIII. WARRANTY
25
26
Cover
103721 Rev. F