AERMEC WRC1 Manual De Usario página 42

EN
The following table indicates which functions match the various icons available on the wired panel's LCD display:
Index Function
1 Indicates that AUTOMATIC mode is active (only available on the MASTER unit)
Indicates that COOLING mode is active (only available if the MASTER unit is set with a
2
compatible mode): COOLING, DEHUMIDIFICATION)
Indicates that DEHUMIDIFICATION mode is active (only available if the MASTER unit is set
3
with a compatible mode): COOLING, DEHUMIDIFICATION)
4 Indicates that VENTILATION ONLY mode is active
Indicates that HEATING mode is active (only available if the MASTER unit is set with the
5
same mode)
6 Function not available
7 Function not available
8
If this icon is displayed, it Indicates that the SLEEP function is active
9
Function not available
10 Indicates that Quiet Operation mode is active
11 If fitted, it indicates that wired panel backlighting is active
12 Function not available
13 Indicates that the SWING function (motor-driven fins) is active
14
Function not available
15
Indicates the current fan setting
These icons are displayed when setting operating parameters; they indicate the maxi-
16
mum (when setting the heat limit) or minimum (when setting the cool limit) values
17 During normal unit operation, the temperature setting in use is displayed
18 Indicates the unit of measure used to indicate the temperature settings
This group of icons depicts the functions and information associated with the system time
19
or the options associated with the unit ON/OFF timer
20
Function not available
21
Indicates that energy saving mode is active on the indoor unit connected
22 Function not available
23 Indicates that the Indoor unit if OFF via remote contact
42
Function available
on models
All models
All models
All models
All models
All models
---
---
All models
---
All models
All models
---
All models except can-
alised systems
---
All models
All models
All models
All models
All models
---
All
---
All