AERMEC WRC1 Manual De Usario página 43

Index Function
24 Indicates that the key lock function is activated on the panel
Indicates that the wired panel is a slave (i.e. two wired panels are connected to the
25
indoor unit: one master and one slave)
Indicates that an attempt has been made to use a locked panel using monitoring soft-
26
ware (MVA MONITORING)
27 This icon appears in order to indicate that the filter on the indoor unit must be cleaned
28 Indicates that the outdoor unit is operating in "safe" mode
29 Function not available
30 Indicates that the outdoor unit is currently defrosting
This icon indicates that the panel was disengaged by a remote controller (zone control,
31
mains control or MVA MONITORING software)
Indicates that the X-Fan function is active on the unit (this functions dries the coil in cool
32
or dehumidification mode)
33 Function not available
34 This icon indicates that the wired panel controls several indoor units (a group)
Indicates that the Indoor unit is resuming the settings stored in memory (this event occurs
35
after a black-out)
36 Indicates that the indoor unit connected to the panel is the system MASTER
EN
Function available
on models
All
All
All
All
All
---
All
All
All
---
All
All
All
43