Set The Display Function On The Indoor Unit (Led And Two-Figure Display) - AERMEC WRC1 Manual De Usario

EN

Set the DISPLAY function on the indoor unit (led and two-figure display):

To activate or de-activate illumination of the indoor unit display (obviously except for canalised units), perform the following
operations:
(1)
press the "FUNCTION" key until the icon for this function appears (
thereby indicating that the function has been selected;
(2)
press the "SWING/ENTER" button again to activate the selected function;
(1)
60
); at this stage, the selected icon will begin to fl ash,
(2)
WARNING: to disac vate this func on,
press the "FUNCTION" bu on un l the
func on to be cancelled is selected and then
press the "SWING/ENTER" button