Set The Energy Saving Function (Active On Indoor Unit) - AERMEC WRC1 Manual De Usario

Set the ENERGY SAVING function (active on indoor unit):

This mode is available for heat and cool operations (in the fi rst instance a minimum set is defi ned, while in the latter case a
maximum set is defi ned as the setpoint limits beyond which it will not be possible to operate the machine); to see this function
(with the unit ON), perform the following operations:
(1)
press the "FUNCTION" key until the Energy Saving icon appears (
additionally, the wording "MIN" will be displayed when setting energy saving during cooling mode or "MAX" when setting a
value during heating mode;
(2)
press the buttons ( ) or (
as the limit for the operating setpoint;
(3)
press the "SWING/ENTER" button again to activate the selected function;
(1)
Set MINIMUM
(cooling mode)
(3)
) to set a maximum or minimum value (in relation to the active operating mode) to be used
); at this stage, the selected icon will begin to fl ash;
(2)
WARNING: to disac vate this func on,
press the "FUNCTION" bu on un l the
func on to be cancelled is selected and then
press the "SWING/ENTER" button
EN
61