Bolt Size / Tools / Torque Specifications - Turbo LEVO Manual De Usuario

WARNING! Specialized frames are compatible ONLY with forks that have a specific range of travel
(see table). Use of different styled forks or forks with longer travel may result in catastrophic
failure of the frame which may result in serious personal injury or death.
With the chainguide removed, a 36t chainring can be used.
2
WARNING! While the 29 frame is generally compatible with tires up to 27.5 x 3.0 or 29 x 2.6, tire
dimensions can vary depending on the manufacturer, and not all forks are designed to accept a
larger tire. Always check with the fork manufacturer regarding required clearances.
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important
for your safety. If too little force is applied, the fastener may not hold securely. If too much force is
applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening
force can result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and
consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the
components. The following is a summary of torque specifications in this manual:
GENERAL TORQUE SPECS:
LOCATION
SEAT COLLAR
STEM @ STEERER TUBE
STEM @ HANDLEBAR
CRANK BOLTS
CHAINRING BOLTS
SPIDER LOCKRING
REAR BRAKE GUIDE
WATER BOTTLE BOSS
12MM REAR AXLE
DERAILLEUR HANGER
CHAINSTAY PROTECTOR
CARBON FRAME - HEAD TUBE EXIT PORT
(mounting screw)
CARBON FRAME - HEAD TUBE EXIT PORT (set
screw)
ALLOY FRAME - SIDE-ARM CABLE BATS
ALLOY FRAME - HEAD TUBE HOUSING PORT
BATTERY MOUNT
DOWN TUBE BUMP STOP
TCU DISPLAY
MOTOR MOUNTS
MOTOR COVER
CHAINSTAY MOUNTED SENSOR
SPEED SENSOR MAGNET

13.3. BOLT SIZE / TOOLS / TORQUE SPECIFICATIONS

TOOL
4mm HEX
4mm HEX
4mm HEX
8mm HEX
5mm HEX
Shimano BB-UN 98
/ Park Tool BBT-18
2.5mm HEX
3mm HEX
6mm HEX
2.5mm HEX
T25 TORX
2mm HEX
1.5mm HEX
3mm HEX
3mm HEX
6mm HEX
T25 TORX
T10 TORX
6mm HEX
3mm HEX
2.5mm HEX
T25 TORX
TORQUE (in-lbf) TORQUE (Nm)
45 5.1
3 3
45 5.1
45 5.1
443 50
89 10
4 4
443 50
7 0.8
25 2.8
133 15.0
7 0.8
7 0.8
7 0.8
N/A N/A
9.5 1.0
9.5 1.0
55 6.2
55 6.2
7 0.8
160 18
9.5 1.0
18 2.0
55 6.2
30