Weighing A Sample; Counting Mode - Baxtran BR 40 Manual De Usuario

6.3 WEIGHING A SAMPLE

To determine the weight of a sample first tare the empty container and then place the sample in the container. The display will show the weight
and the units of weight currently in use.

6.4 COUNTING MODE

When the display shows the weight, press the key
The display will show "
scroll across the various options: 10, 20, 50, 100, 200 and again to 10.
Press the key . When the calculation of number of parts show the number of parts that are on the platform, from this point on, the com-
puter will display the number of parts deposited on the platform.
If you want to use a container for deposit the parts to count, previously it must be weight .For this deposit the empty packaging on the platform
and press the key
C
Press the key to return to the normal mode of weighing.
6.5 WEIGHT CONTROL (FUNCTION CHECKWEIGHER)
6.5.1 OPERATIVE
Check-weighing is a procedure to make ring an alarm to sound when the weight placed on the meet or exceed values stored in memory. The
memory holds values for a top limit and a low limit.
6.5.1.1 TYPES OF WEIGHT CONTROL
RANGE OF CONTROL:
Establishes a range between two limits to make weight control.
It is necessary to program a upper and lower limits with different values.
TARGET WEIGHT:
A point is set to perform the exact weight control.
It is necessary to program a upper and lower limits to the same value.
6.5.1.2 AUDIBLE ALARM OPERATIONS
OPERATION MODE 2 OF THE AUDIBLE ALARM.
It sets the operation mode of the audible alarm. When it will be in the range of control, the display will show OK and the alarm will ring
when the weight will be between the two limits. When it will be in the weight objective, of weight, the display will show OK and the alarm
will ring when the weight matches the value programmed in the limits.
MODE 3 OPERATION OF THE AUDIBLE ALARM.
It sets the operation mode of the audible alarm. When it will be in the range of control, the display will show OK and the alarm will ring
when the weight will be the out of bounds. When it will be in the weight objective, the display will show OK and the alarm will ring when
the weight does not match the value programd in the limits.
36
" requesting a sample of 10 pieces. Change the value of the sample by pressing the key
P 10
.
and will start the counting function.
USER'S MANUAL BR40
. The display will
EN