Baxtran BR 40 Manual De Usuario página 38

6.5.2 PROGRAMMING OF LIMITS
DESCRIPTION
STEPS
1
Press the key
Press the key
2
"SET LO " (programming of the lower limit)
3
Press the key
Use the key
4
C
5
After you enter the value, press the key
6.5.3 PROGRAMMING OF THE AUDIBLE ALARM
PASOS DESCRIPCIÓN
1
Press the key
2
Press the key
3
Press the key
4
Then press the key
sound).
Press the key
5
NOTE:
The weight must be greater than 20 divisions of scale so that the weight control could operate. Desactivate the weight control function, enter
zero in both limits by pressing the key
C
and the display will show F0 H-L
to enter, use the key
to enter.
or to move the active digit. Use the key
to delete the value.
C
to enter on the configuration mode.
successively until the display shows "F4 OFF".
to enter and the key
to enter and the key
to save, press the key
when the currents limits will be shown and then pressing
to select " " (programming of the upper limit" or
SET HI
To change the value. Use the key
to record, press the key
until the display shows "BEEP ".
to select BP 2 (mode 2), BP 3 (mode 3), BP 1 (no
to exit.
USER'S MANUAL BR40
to exit.
To save the zero values.
EN
37