Baxtran BR 40 Manual De Usuario página 40

7. CONFIGURATION
The viewer has 6 settings that can be set by the user, in addition to a method for entering the calibration section.
STEPS DESCRIPTION
1
To set up the parameters press the key
The display will show the first function:
2
3
If you press the key
4
If you press the key
It may be necessary to use
Use the key
5
Press the key
Use the key
FOR EXAMPLE, when the display shows "
The display will show "
SET Lo
to set the maximum limit.
After pressing the key
digit. Continue with the next digit, and establish the necessary quantities.
When all digits have been configured, press the key
example "SEt". Continue until you reach another parameter if its necessary or press the key
7.1 CONFIGURATION OF FUNCTIONS MENU
You can access to the menu
MENU SUB-MENU
F0 H-L SEt Lo
SEt HI
F0 H-L
, will scroll across the other functions
you are able to configure the function.
or set a value using the key
to increase a digit
to enter the value.
To leave the setting as it was.
F0 H-L " press the key
", press the key
to set a limit, use the arrow keys
C
from the user moder normal weight
description
Set a value as the lower limit
Set a value as the upper limit
C
.
to start.
to establish the minimum limit, or press
to change the flicker digit and then use the key
to store the value. The display will return to the parameter that was just configured, for
USER'S MANUAL BR40
to change the active digit.
To move to the next parameter, "SET HI"
To return to the normal weight.
EN
To increase the flicker
39