Controls And Signals - LAVAZZA LB 1102 Instrucciones De Empleo

Green signal light.
1
Manual coff ee dose brewing button.
2
Espresso dose brewing button.
3
Long coff ee dose brewing button.
4
Anomaly red fl ashing light.
5
Flashing: anomaly that can be resolved by the
operator.
Steady on: anomaly that requires technical as-
sistance.
MACHINE STATUS
Heating
Machine ready (at temperature)
Lack of water in the tank/Extraction
of tank
Coff ee brewing
Start coff ee brewing button pressed
with no pod inserted
Full used capsule drawer/drip tray,
bad positioning or missing while
machine is heating
Full used capsule drawer/drip tray,
bad positioning or missing when
machine is ready
Opening capsule loading arm while
machine is heating
Opening capsule loading arm when
machine is ready (at temperature)
Energy saving
Faulty machine
= Off = Flashing

CONTROLS AND SIGNALS

1
2
1 2 3 4 5
= On = Sound
5
4
3
All three of the coff ee dose brewing buttons
are programmable.
The machine is provided with three pre-
programmed buttons for the following
amounts.
2 150 cc approx
3 30 cc approx
4 60 cc approx
SOUNDS EVENTS
Tune.
1 sound at failure to detect of when extracting the tank.
1 sound when pressing the dispensing start and stop button.
3 sounds when pressing the dispensing start button.
3 sounds indicate the drawer is full.
1 sound when the empty drawer is inserted, after which the
heating phase begins.
3 sounds indicate the tank is full.
1 sound when the empty drawer is inserted.
1 sound when opening and closing the capsule loading arm.
1 sound when opening and closing the capsule loading arm.
The machine goes into energy saving mode after one hour of
inactivity.
Tune after pressing any button or when lifting the capsule load-
ing arm to restart the machine.
Continuous sound for 40 seconds.
The sound is repeated if a dispensing button is pressed.
= Tune
E N
= Blink = Fade
11