Selecting The Saw Blade - Dexter 20VJS2-28.1 Manual De Instrucciones

FR FR
5. OPERATION
ES ES
SAW BLADE
PT PT
IT IT
EL EL
PL PL
RU RU

SELECTING THE SAW BLADE:

KZ UA
WARNING! Always ensure the product is switched off and remove the battery before carrying out
any work on the product!
UA KZ
T type blade can be used with the product depending on the workpiece material.
Inserting /changing the saw blade:
RO RO 1. Clean the shaft on the saw blade before inserting it. A dirty shaft cannot be securely fixed in
place.
2. Insert the saw blade into the saw blade holder until the stop with a click sound. The lock knob
BR BR
will be automatically turned in anti-clockwise 90°.
3. Make sure that the saw teeth should always point to front.
EN
EN
4. Make sure when inserting the saw blade that the back of the saw blade is in the groove on the
guide roller.
5. Check that the saw blade is seated securely by pulling the saw blade. A loose saw blade can fall
out and lead to injuries.
Removing the saw blade
1. Turn the lock knob for blade clamp in clockwise 90°at the direction of saw teeth and remove
the saw blade.
2. Take firmly the saw blade to avoid the ejecting of saw blade cause by the inner spring force.
332
WARNING! Always use saw blades according to the intended use!
For example, never use a saw blade intended for working on wood for working on metal
or vice Using damaged cutting or roughing blades is dangerous and may cause serious
injury.
Observe the technical specifications of this product and the saw blades when purchasing
and using saw blades!
Attachments are sharp and hot after use! Handle them with care! Wear safety gloves
when handling attachments to avoid injuries like burns and cuts!