Update Menu; Change Password; Firmware Update; Binding Parameters Update - HellermannTyton Autotool 2000 CPK Manual De Instrucciones

HT Data Management

7 .10 Update menu

1 Change password

2 Firmware update

3 Binding parameters update

4 Update additional languages
7 .10 .1 Change password
The password consists of four characters and the default
setting is 0000. HellermannTyton recommends setting an
alphanumeric password that includes at least one special
character.
f Click on Change.
; A Windows pop-up opens.
f Enter the current password and click on
f Enter the new password and click on
f Re-enter the new password and click on
; The password is changed.
7 .10 .2 Firmware update
A firmware update includes an update for many languages.
Languages such as Asiatic languages that do not use the
Latin alphabet have to be updated separately,
à „Update additional languages" on page 21.
f Click on Firmware update power pack
or
f Click on
Firmware update
20
OK to confirm.
OK to confirm.
OK to confirm.
CPK.
tool.
There are separate HEX files for the AT2000 CPK and the
power pack CPK.
; A Windows pop-up opens.
f Select the appropriate HEX file.
f Click on Open to confirm.
; The Start upload button appears on the screen.
f Click on
Start upload.
; The new firmware is uploaded to the AT2000 CPK.
7 .10 .3 Binding parameters update
f Click on
Load from file.
; The name of the file appears in
(TXT file provided by HellermannTyton).
f Click on Send to tool.
; The new binding parameters are uploaded to the
AT2000 CPK. The progress bar shows progress of the
data transfer in %.
AT2000 CPK• Operating Instructions • 04-2015 • 106-29004
1
2
3
4
File loaded: