Electrical Connections Checkout (N.C. Systems) - Haldex RF5910XX Manual De Instalación

I. Connect other terminal of Manual Toggle Switch to vehicle
accessory or ignition terminal.
J. Connect one terminal of Air Pressure Switch to vehicle ground.
K. Connect other terminal of Air Pressure Switch to Indicator Light.
L. Connect other Indicator Light Terminal to vehicle accessory or
ignition terminal.
M. Connect battery cables to battery.
ELECTRICAL CONNECTIONS CHECKOUT
N.C. Electric Control System
A. With Engine temperature below Thermal Switch setting, turn on
ignition and build up air pressure.
B. Disconnect one terminal of N.C. Thermal Switch. This will
engage fan clutch.
Keep hands and tools clear of fan blades. Fan Clutch
can engage without warning.
C. Reconnect the terminal of N.C. Thermal Switch. This will
exhaust air and disengage fan clutch.
D. Set Manual Toggle Switch to "OFF". This will engage fan
clutch; Indicator Light will light when fan clutch is engaged. If
indicator light fails to light, check bulb and Indicator Light's
ground connection.
"ON" position is for automatic operation, "OFF"
position is for continuous operation.
WARNING
NOTE
6