Haldex RF5910XX Manual De Instalación página 12

Combination of Basic N.O. Electrical Control System and
Manual By-Pass with Indicator Light Control System and
Optional Air Conditioning Control System (See Fig. 10).
A. Remove battery cables from battery.
B. Install Air Pressure Switch into air line between N.C.
Solenoid Valve and Fan Clutch.
C. Mount Indicator Light and Manual Toggle Switch on
dashboard or other convenient location.
Manual Toggle Switch is stamped "OFF" and "ON".
"ON" position is for continuous operation, "OFF"
position is for automatic operation. Set Manual
Toggle Switch to "OFF" position and note position
for future reference.
D. Install the N.O. Freon Pressure Switch into high pressure
Freon line of air conditioning system.
E. Connect Black lead of the N.C. Solenoid Valve to vehicle
ground.
F. Connect Red lead of the N.C. Solenoid Valve to one terminal
of the N.O. Thermal Switch.
G. Connect the other terminal of the N.O. Thermal Switch to
vehicle accessory or ignition terminal.
H. Connect one lead of Manual Toggle Switch to Red lead
connecting the N.C. Solenoid Valve to terminal of the N.O.
Thermal Switch.
I. Connect other lead of Manual Toggle Switch to vehicle
accessory or ignition terminal.
FIGURE 10
NOTE
VEHICLE GROUND
BLACK
N.C. SOLENOID
VALVE
RED
N.O. FREON
PRESSURE
SWITCH
N.O.
THERMAL
SWITCH
ACCESSORY OR IGNITION TERMINAL
8
MANUAL
TOGGLE
AIR PRESSURE
SWITCH
SWITCH
INDICATOR
LIGHT