Haldex RF5910XX Manual De Instalación página 9

D. Connect Red lead of N.O. Solenoid Valve to one lead of the
N.C. Freon Pressure Switch.
E. Connect other lead of N.C. Freon Pressure Switch to one
terminal of the N.C. Thermal Switch.
F. Connect the other terminal of the N.C. Thermal Switch to
vehicle accessory or ignition terminal.
G. Connect battery cable to battery.
Combination of Basic N.C. Electrical Control System and
Manual By-Pass with Indicator Light Control System and
Optional Air Conditioning Control System (See Fig. 7).
A. Remove battery cables from battery.
B. Install Air Pressure Switch into air line between N.O.
Solenoid Valve and Fan Clutch.
C. Mount Indicator Light and Toggle Switch on dashboard or
other convenient location.
Manual Toggle Switch is stamped "OFF" and "ON".
"OFF" position is for continuous operation, "ON"
position is for automatic operation. Set Manual
Toggle Switch to "ON" position and note position
for future reference.
D. Install Freon Pressure Switch into high pressure Freon line
of air conditioning system.
E. Connect Black lead of N.O. Solenoid Valve to vehicle ground.
FIGURE 7
F. Connect Red lead of the N.O. Solenoid Valve to one lead of the
N.C. Freon Pressure Switch.
G. Connect other lead of N.C. Freon Pressure Switch to one
terminal of the N.C. Thermal Switch.
H. Connect the other terminal of the N.C. Thermal Switch to one
terminal of Manual Toggle Switch.
NOTE
VEHICLE GROUND
BLACK
N.O.
SOLENOID
VALVE
RED
N.C.
FREON
PRESSURE
SWITCH
N.C.
THERMAL
SWITCH
MANUAL
TOGGLE
SWITCH
ACCESSORY OR IGNITION TERMINAL
AIR
PRESSURE
SWITCH
INDICATOR
LIGHT
5