Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
VEHICLE PREPARATION
A.
Turn vehicle ignition off.
Protect radiator from possible damage from fan during
fan removal and re-installation.
B.
Remove fan and place it inside radiator shroud.
C.
Remove existing fan hub, mounting bolts and/or nuts and
belts.
FAN CLUTCH INSTALLATION
A.
Position the Fan Clutch Assembly on engine and align
holes for mounting (See Fig. 2).
B.
Tighten SAE Grade 8 mounting bolts and/or nuts to vehicle
manufacturer's specifications (See Fig. 2).
FIGURE 2
C.
Replace and adjust belts.
Correct belt adjustment and alignment is necessary for all belt
driven components to assure longevity of component life. Over
tightening of belts will shorten bearing life. Loose belts will cause
excessive belt wear. Consult equipment manufacturer and/or
engine manufacturer specifications for proper belt adjustment.
D.
Mount fan onto Fan Clutch and tighten nuts to vehicle
manufacturer's specifications.
Maximum metal fan diameter for Type "S" and"HT/S"fan clutches
is 28" and 32" respectively. Maximum metal fan diameter for the
9" Single Plate fan clutch is 32".
INSTALLATION
NOTE
FAN CLUTCH
FAN
CAUTION
WARNING
2
Publicidad
Capítulos
Tabla de contenido
