Station Point Setup; Point Name, Pn, Input; Coordenada, X, Y, Z, Ih, Y Pc Input - Pentax R-100 Serie Manual De Instrucciones

Select 1. RECTANGULAR COORD. and press the [ENT] key to view the STATION POINT SETUP screen.
The / mark is used to scroll up / down. 6. PC is viewed by

4.1.1 Point name, PN, input

Press the [ENT] key to view the PN screen.
The [ENT] key is used for both accepting the selected choice and opening the input screen of the
Coordinates values etc. at the PowerTopoLite.
Input your desired point name by pressing arrow keys and [F5][SELECT] each time, and press the
[ENT] key to enter the Point name.
Each Character is selected by pressing [F5][SELECT] each time. After all Characters are
selected, press the [ENT] key to enter.
Three character selection methods are available.
(Refer to the "3. INPUT METHOD of 10. Preference")

4.1.2 Coordenada, X, Y, Z, IH, y PC input

Accede automat. a la coordenada 2.X.
Pulse [ENT] para ver la pantalla de introducción de la coordenada X.
Introduzca las coordenadas X, Y, Z y la altura del instrumento de la siuguiente manera.

STATION POINT SETUP

1. PN:
2. X: + 00000000.000 m
3. Y: + 00000000.000 m
4. Z: + 00000000.000 m
5. IH: 0000.000 m
SAVE LIST
STATION POINT SETUP
2. X: + 00000000.000 m
3. Y: + 00000000.000 m
4. Z: + 00000000.000 m
5. IH: 0000.000 m
6. PC:
SAVE LIST
PN
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
BS
POT1
X
1. PN: POT1
2. X: + 00000000.000 m
3. Y: + 00000000.000 m
4. Z: + 00000000.000 m
5. IH: 0000.000 m
SAVE LIST
X
1. PN:POT 1
+00000000.000 m
2. X: + 00000000.000m
3. Y: + 00000000.000 m
4. Z: + 00000000.000 m
5. IH: 0000.000 m
18
ACCEPT
.
ACCEPT
SP
SELECT
ACCEPT
CLEAR