General Information - Stiga P 901 C Manual De Instrucciones

EN
WARNING!: READ THOROUGHLY THE INSTRUCTION BOOKLET BEFORE USING
THE MACHINE. Keep for future reference
INDEX

1. GENERAL INFORMATION ........................... 1

2. SAFETY REGULATIONS .............................. 2
3. INFORMATION ON MUD / SNOW /
STUDDED TYRES ........................................ 2
3.1 Description and foreseen use................ 2
4. MOUNTING THE WHEELS .......................... 3
4.1 Preparation ........................................... 3
4.2 Choice and positioning of the wheel jack
.............................................................. 3
4.3 Changing the wheel .............................. 3
4.4 Mounting the studs ................................ 3
4.5 Repairing or changing tyres ...................... 3
5. MAINTENANCE ........................................... 4
5.1 Cleaning ................................................ 4
6. STORAGE .................................................... 4
7. MAINTENANCE TABLE ................................ 4
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain
important information regarding safety and
operation and are emphasized in this manner:
NOTE or IMPORTANT these give details
or further information on what has already been
said, and aim to prevent damage to the machine.
The symbol highlights danger. Non-
compliance with the warning could lead to
personal and/or third party injury and or damage.
The paragraphs highlighted in a square with
grey spots indicate the optional characteristics
not on all models documented in this manual.
Check if the characteristic is on this model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for
use are numbered 1, 2, 3, etc.
Components shown in the figures
are marked A, B, C, etc.
A reference to component C in figure 2 is
written: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The
actual parts may vary from those shown.
1.2.2 Titles
The manual is divided into chapters and
paragraphs. The title of paragraph "2.1
Training" is a sub-title of "2. Safety regulations".
References to titles or paragraphs are marked
with the abbreviation chap. or par. and the
relevant number. Example: "chap. 2" o "par. 2.1".
EN - 36