Guarantee; Translation Of The Original Eu Declaration Of Conformity - AL-KO solo 6436 Traducción Del Manual Original De Instrucciones

GB

15 GUARANTEE

We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The guarantee excludes:
■
Paint damage that can be attributed to normal wear and tear
■
Wear parts that are marked with a frame
■
Internal combustion engines (these are covered by the guarantee provisions of the corresponding
engine manufacturers)
The guarantee period commences with purchase by the first end user. The date on the proof of pur-
chase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the
original proof of purchase, and contact your dealer or the nearest authorised customer service centre.
This statement does not affect the purchaser's statutory claims for defects against the vendor.

16 TRANSLATION OF THE ORIGINAL EU DECLARATION OF CONFORMITY

We hereby declare that this product in its marketed form conforms to the requirements of the harmon-
ised EU Directives, EU safety standards and the product-specific standards.
Product
Chain saw
Serial number
G4011022
Type
6436
6442
Sound power level
EN ISO 3744
measured/guaranteed
6436: 109.9 / 113 dB(A)
6442: 110.0 / 113 dB(A)
Type examination as per
2006/42/EC Annex IX
BM 18SHW0351-01
58
The warranty becomes void in the case of:
■
■
■
xxxxxx (x)
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
Germany
EU directives
2006/42/EC
2014/30/EU
2000/14/EC
Conformity evaluation
2000/14/EC – Appendix V
Notified body
Intertek Deutschland GmbH
Stangenstraße 1
D-70771 Leinfelden-Echterdin-
gen
Germany
No. 0905
Unauthorised repair attempts
Unauthorised technical modifications
Non-intended use
on the spare parts card
Duly authorised person for techni-
cal file
Andreas Hedrich
Ichenhauser Str. 14
D-89359 Kötz
Germany
Harmonised standards
DIN EN ISO 11681-1:2011
DIN EN ISO 14982:2009
Kötz, 11/01/2018
Dr. Wolfgang Hergeth
Managing Director
Guarantee
6436 | 6442