Technical Data; Directives And Manufacturer's Declaration - Ottobock BionicLink 60X7 Instrucciones De Uso

Compliance with the requirements according to the "Radiocommunications Act"
(AUS)

10.2 Technical data

Ambient conditions
Storage and transport in original packaging
Storage and transport without packaging
Operation
General
Reference number
Product service life
Range of the Bluetooth connection in buildings approx. 10 m
Bluetooth class
Operating voltage
Power supply
Recommended adjustment software
Data transfer
Wireless technology
Range
Frequency range
Modulation
Data rate (over the air)
Maximum output power (EIRP)

10.3 Directives and manufacturer's declaration

Tables according to IEC 60601-1-2 for the product 'BionicLink 60X7'.
Table 1 – Electromagnetic emissions for all devices and systems
Directives and manufacturer's declaration – electromagnetic interference
The product 'BionicLink 60X7' is designed for operation in an electromagnetic environment as
specified below. The customer or user of the product 'BionicLink 60X7' must ensure that the
device is operated in such an environment.
Interference measurements
HF emissions according to
CISPR 11
±0 °C/+32 °F to +60 °C/+140 °F
max. 93 % relative humidity, non-condensing
±0 °C/+32 °F to +60 °C/+140 °F
±0 °C/+32 °F to +60 °C/+140 °F
60X7 BionicLink
5 years
Class 2
3.6V
By the orthosis battery
C-Soft, version 2.6 or later
Bluetooth 2.0
approx. 10 m / 32.8 ft
2402 MHz to 2480 MHz
GFSK
704 kbps
-1.78 dBm (0.66 mW)
Compliance
Group 1
Electromagnetic environ­
ment directive
The product 'BionicLink 60X7'
uses HF energy exclusively for
its internal functioning. There­
fore its HF emissions are very
low and interference with
neighbouring electronic
devices is unlikely.
Ottobock | 19