Description; Specifications And Composition - Rancilio EPOCA E Instrucciones Originales

2. DESCRIPTION

The machines in the EPOCA series have been de-
signed to prepare express coffee and hot beverages.
A positive-displacement pump inside the machine
powers the heater in which the water is heated.
By pressing the appropriate buttons, water is sup-
plied to the spouts in the form of hot water or steam,
according to needs.
The water to be used for the beverages is supplied
directly by the water supply, pressurized by the pump
and immediately heated by the steam produced by the
boiler or from an incorporated tank containing a sof-
tener for softening the water by trapping calcium salts.

2.1 Specifications and composition

E - 1 Gr
S - 1 Gr
S Tank - 1 Gr
E - 2 Gr
S - 2 Gr
Legend:
A Semiautomatic system; manual dispensing start
and stop.
B Automatic system; electronic control of coffee and
hot water doses dispensed.
C No. of coffee dispensing units.
D No. of steam spouts.
E No. of hot water spouts.
On request:
 cup-warmer.
A B
- ok
ok -
ok -
- ok
ok -
The machine is composed of a steel carrying struc-
ture on which the mechanical and electrical compo-
nents are fitted.
These are completely covered with panels made of
painted polyurethane and stainless steel.
The beverages are dispensed at the front of the
machine, where all the buttons, control devices and
dispensers are to be found.
There is a cup-warming plate on the top of the ma-
chine.
C
1
1
1
2
2
Legend (Fig. 3):
1 Steam tap
2 Steam spout
3 Hot water tap
4 Hot water spout
5 Coffee dispensing unit
6 Coffee dispensing button
8 Level indicator
9 Gauge
10 Power on-off switch and led
11 Switch and boiler resistance engagement light.
12 Cup heater switch and indicator (2 Gr only)
13 Water-tank (1 Gr Tank only)
14 Water shortage pilot light (1 Gr Tank only)
D E
1 1
1 1
1 1
2 1
2 1
53